Balluff BOS R254K-UUI-PR10-S4 Notice D'utilisation page 28

BOS R254K-UUI-PR/R_1_-S4
Photoelectric Sensors
7
IO-Link interface
The IO-Link device supports the functions listed in this
chapter.
For further information, see document IO-Link
configuration under www.balluff.com on the
product page.
Primary functions
– Identification
– Device Discovery
– Switching Profiles
(only BOS R254K-...-PR10/RE10/RH10/RH11-...)
– Optical Frontend
(only BOS R254K-...-PR10/RE10/RH10/RH11-...)
– Transmitter Lifetime Info
(only BOS R254K-...-PR10/RS10/RH10/RH11-...)
– Sensor Operating Modes
(only BOS R254K-...-PR10/RE10/RH10/RH11-...)
– Teach-In 100% Reference
(only BOS R254K-...-PR10/RE10...)
– Automatic Switching Threshold Adaption
(only BOS R254K-...-PR10/RE10...)
– Switching Threshold Presetting
(only BOS R254K-...-PR10/RE10...)
– Signal Quality
(only BOS R254K-...-PR10/RE10/RH10/RH11-...)
Secondary functions
– External Signal Blanking
(only BOS R254K-...-PR10/RE10/RH10/RH11-...)
– Signal Delay
– Signal Speed Monitor
– Switching Counter
– Basic Statistics
– Logic Blocks
– Operating Hours Counter
– Boot Cycle Counter
– Voltage and Current Monitoring
– Extreme Environment Status
– Internal Temperature
– Inclination and Installation Aid
– Vibration
– Humidity
– Storage Usage Monitoring
10 english
System functions
– Device Status and Detailed Device Status
– Diagnosis Suppression
– Reset Commands
– Variant Configuration
– Pin Assignment
– LED Meaning and Configuration
– Process Data Info and Configuration
– Profile Characteristic
– Device Access Locks
– Parameter Manager