Publicité
Les langues disponibles
Les langues disponibles
Introduction
List of pictograms used
Read the instructions!
Parasol base
Introduction
Congratulations on the pur-
chase of your new product.
You have chosen a high-quality
product. The assembly and operat-
ing instructions are part of this prod-
uct. Please read through all of these
instructions and take note of the ad-
vice they contain before starting with
assembly. These instructions contain
important assembly and care infor-
mation. Keep these instructions safe
and also include them if you pass
the product on to others.
Intended use
The umbrella base is suitable as a
stand for patio umbrellas with a
specific pole diameter of between
22 and 38 mm, and a maximum
projected umbrella area of 2.5 m
The umbrella stand is only intended
6
GB/IE/NI
Observe the warnings
and Safety instructions!
for private use. It is not suitable for
commercial use.
Description of parts
and contents
2 x Round end caps
1
2 x Base halves, fillable with
2
sand
1 x Half tube A
3
1 x Adjusting ring umbrella
4
pole Ø 22 mm
1 x Adjusting ring umbrella
pole Ø 23‒25 mm
1 x Adjusting ring umbrella
pole Ø 26‒30 mm
1 x Adjusting ring umbrella
pole Ø 31‒33 mm
1 x Nut
5
1 x Reducing part for umbrella
6
poles below 32 mm
2 x Connecting parts
7
4 x Cover plates
8
1 x Half tube B
9
.
2
Publicité
