Futurelight PFE-1200 Lighting effect Mode D'emploi page 41

Run
- Program Run, Master setting
With the function "RUN", you can run the internal program. You can set the number of steps under Step.
You can edit the individual scenes under Edit. You can run the individual scenes either automatically
(AUTO), i.e. with the adjusted Step-Time or sound-controlled (SOUN). The selection "ALON" means
Stand Alone-mode and "MAST" that the device is defined as master.
♦ Select "AUTO" or "SOUN" by pressing [UP].
♦ Press [ENTER] for selecting the desired extension menu.
♦ Select "ALON" or "MAST" by pressing [UP].
♦ Press [ENTER] to confirm.
♦ Press [EXIT/DN] in order to return to the main menu.
Disp
- Display the DMX-value, Reverse display, Shut off LED display
- Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel.
♦ Select "VALU" by pressing [UP].
♦ Press [ENTER] to confirm; the display shows"D-00". In this setting, the DMX-adjustment of every
channel will be displayed.
♦ Press [UP] in order to select the desired channel. If you select "D-14" the display will only show the
DMX-value of the 14
♦ Press [ENTER] to confirm.
♦ The display shows"D-XX", "X" stands for the DMX-value of the selected channel.
♦ Press [ENTER] or [EXIT/DN] to exit.
rDis
- Reverse display
With this function you can rotate the display by 180°.
♦ Select "rDIS" by pressing [UP].
♦ Press [ENTER], the display shows"ON" or "OFF".
♦ Press [UP] to select "ON" if you wish to enable this function or "OFF" if you don't; the display will
rotate by 180°.
♦ Press [ENTER] or [EXIT/DN] to exit.
- Shut off LED display
With this function you can shut off the LED display after 2 minutes.
♦ Select "CLDI" by pressing [UP].
♦ Press [ENTER], the display shows"ON" or "OFF".
♦ Press [UP] to select "ON" if you wish to enable this function or "OFF" if you don't.
♦ Press [ENTER] or [EXIT/DN] to exit.
th
channel.
41/93 51837580_V_1_2.DOC