BETEX BLF Serie Manuel D'utilisation page 15

7. Method of operation
WARNING!
• Use suitable lifting equipment for heavy yokes and workpieces. Prevent
personal injury by improper handling.
• The weight of the workpiece may not exceed the value given in section 7.3
and in the technical specifications. This can cause failure of the device and
personal injury.
• Ensure that the power supply cable cannot come into contact with the
workpiece to be heated. Damage to the cable can cause electrocution!
• Never use a metal strap to support workpieces or suspend them in the
magnetic field. High currents could start running through the strap, causing
it to heat up.
A workpiece can be placed in different ways:
Hanging, with yoke
through the workpiece
Horizontal, with workpiece
around the pole
Large workpieces can be thermally insulated by wrapping them in insulating material, such as
a welding blanket. This ensures that the heat stays in the workpiece and does not dissipate.
© BETEX Tools
Horizontal, with workpiece
around the pole
Horizontal, with workpiece
around the yoke
Hanging, with yoke
through the workpiece
Horizontal, with workpiece
around the yoke
EN
DE
ES
FR
NL
15