Risco industrial LuNAR DT AM Grade 3 Guide D'installation page 7

Ind. LuNAR RK200DTG3 Configuration Options
The Ind. LuNAR RK200DTG3 can be configured and/or diagnosed remotely via one of the options:
ACT Mode
LEDs
MW Sensitivity
Diagnostics
Status/Trouble/Info Reports
AM Diagnostics
MW Bypass
MW Disable on Disarm
("Green Line")
LED Display
The three Tri color LEDs in the Ind. LuNAR RK200DTG3, operate as herein described:
LED
Steady
Red
Flashing with low frequency
Flashing with high frequency
Steady
Green
Flashing
Steady
Orange
Flashing
All LEDs
Flashing with change of color
Manual
configuration
by trimmer)
(
-
-
-
-
-
STATE
Detector alarm (simultaneous PIR and MW
detection)
Indicates malfunctioned communication
with ProSYS
AM detection
Microwave detection
Trouble in the MW channel
PIR detection
Trouble in the PIR channel
Upon power up
Ind. LuNAR RK200DTG3 Installation Guide
Remote ProSYS Bus
Control Control
Device
-
-
-
MEANING
5