and built-in 2.4-inch color screen, easy to program, review
pictures and videos on the screen
Two working modes - Motion detection and Time lapse
Fast trigger time approx. 0.1~0.5 seconds (pre-activated
technology with 3 PIR sensors designed), Fast recovery time
of less than 0.5 seconds, Long trigger distance up to 90ft
Info strip on each capture: Date, Time, Temperature &
Moon phase
Operation Hours, Loop Recording, Time Lapse, Password
Protected
Built for any climate - IP66, Operation Temperature: -4 ~
140°F / -20 ~ 60°C
Support SD/SDHC/SDXC memory card, max capacity
512GB (not included in the scope of delivery)
Extremely long in-field battery life up to 8 months in a
stand-by state with 8 AA 1.5V batteries (not included in the
scope of delivery)
4. PARTS AND CONTROLS
The camera is equipped with 36pcs high efficiency infrared
LEDs, LED Indicators, Lens, PIR Sensors, Lock Holes in front
view (Figure 1).
TIP: During use, the black PIR Lens may be dirty or have
scratches, however it does not affect the performance due to
the reliability design. If you must clean it, please try to blow it
off or pick out the dirt very lightly. Please do not try to wipe it,
which may cause more scratches.
3