GardePro E8 Manuel D'instructions page 23

9. ADVANCED SETTINGS
The trail camera comes with preset manufacturer settings. You
can change the settings to meet your requirements. Once the
camera screen is on, press MENU key to enter/exit the menu.
Press the UP/DOWN key to move the marker, Press the
LEFT/RIGHT key to change the setting, and press the OK
key to confirm the change. Always remember to press the OK
to save the change. Otherwise, you will lose your new setting.
Parameter
Detection,
Mode
Photo or
Video
Photo
Quality
Photo
Burst
Video
Table 2 – Camera Settings
Settings
(Bold =
default)
In Motion Detection mode, the camera
Motion will take photos or videos once triggered.
In Time Lapse mode, the camera will take
Time photos or videos periodically according to
Lapse your preset "Timelapse Interval"
parameter.
Photo,
Video, Select whether still photos or video clips
Photo+ are taken.
Video
48MP Select desired resolution for still photos.
32MP Higher resolution produces better quality
24MP photos, but creates larger files that take
16MP more of the SD card capacity. Larger files
8MP require longer time to write to the SD card,
4MP which will slightly slow the shutter speed.
01, 02, 03,
Select the number of photos taken in
04, 05 sequence per trigger.
1296P Select video resolution (pixels per frame).
Description
19