GardePro E8 Manuel D'instructions page 22

8.6. Important Notes on App Wi-Fi Connection
No.
When the camera's Wi-Fi is connected, the camera
will stop SURVEILLANCE (motion detecting or time
lapse). Disconnect Wi-Fi to enable the camera to go
back to SURVEILLANCE mode.
TIP: How to re-enable the camera start motion
detection?
1
Tap the camera ID "JOHN_GardePro_E8" to
disconnect or remove the current camera, or add new
camera (refer to the following figures).
On the phone device, when the App is closed or runs
in the background, there is a maximum of 90-second
timeout of Wi-Fi connection between App and
camera, before timeout, you can re-open and operate
on the App without reconnecting. However, the
2
camera will not work (capture motions) until the
Wi-Fi timeout is done. Before timeout, you must
disconnect Wi-Fi manually to enable the camera to
capture motions.
When the App connects to the camera, the RED
3
indicator will flash once.
Notes
18