Vasco RF Manuel D'utilisation Et D'installation page 70

4- The P1 start time (which by default is 06:00) will flash.
Using
of 30 minutes.
Save by pressing
5- The P1 end time (which by default is 22:00) will flash. Using
or , you can change this time, by increments of 30 minutes.
Save by pressing
6- Once all the days of the week programmed, press
twice to exit the programming Mode and return to Auto Mode.
Note: without action on the keys, it will return to Auto after a few minutes.
14 USER AND INSTALLATION MANUAL
or , you can change this time, by increments
1
.
1
.
2
2