Vasco RF Manuel D'utilisation Et D'installation page 60

6 BINDING THE RECEIVER/BLOWER WITH
THE RF REMOTE CONTROL
The RF remote control and the RF receiver/Blower are not paired at the factory.
proceed as follow:
Attention:
- A maximum of 5 RF receivers can be connected to 1 RF remote control
- A maximum of 1 blower can be connected to 1 RF remote control,
- It's not possible to connect 1 blower and one or more RF receivers to
1 RF remote control.
RF pairing:
1.
a. RF receiver: put the RF receiver in pairing mode by pressing the
Memo button for 5 sec. RF LED will start to blink in RED.
b. Blower: see manual blower
(included with the radiator packaging or on the website)
2. Put the RF remote control in frost protection mode by pressing the
button 3x and press
04 USER AND INSTALLATION MANUAL
5 sec.
for 5 sec.
5 sec.