Operating Instructions - SPM Frosty2 Manuel D'utilisation Et D'entretien

10. OPERATING INSTRUCTIONS

a) To dispense the product, position the cup
under the tap and pull the dispensing lever (see
figure 8).
b) Adjusting the consistency: to alter the
consistency of the product, turn the screws
located on the back of the machine in the
following way: clockwise to make the product
less dense, counter clockwise to make the
product denser (see figure 9).
Important
This device only changes the consistency of the
product to be dispensed. It does not affect the
cooling temperature of the product.
When the level of the slush inside the bowl is
below the minimum, to prevent the product
from becoming too thick, it is necessary to refill
Data di emissione: January, 2019
Caution
the bowl.
Revisione: 2
Fig. 8
Fig. 9
Pag. : 28/60