Table des Matières
Publicité
Pattes de fixation
Clouer ou visser les pattes de fixation à la charpente pour fixer le foyer.
S'assurer que le foyer en place dans sa charpente est d'équerre et vertical. D'un angle à un autre, le
foyer doit être d'équerre – environ 1,20 m (47-1/8 po). Assurer la perpendicularité du foyer au moyen de
cales.
There are four nailing brackets
on the front of the fireplace.
Follow the directions below to
prepare the nailing brackets.
Once in place, nail or screw the
nailing brackets to the framing.
NOTE: Additional nailing
brackets are provided along
the base of the fireplace.
Use these brackets if not
using the front brackets.
1/2''(13mm)
Drywall
For installations using 1/2''
(13mm) facing fold the larger
tab out 90°F (32.2°C). Use a
screwdriver if necessary.
5/8''(16mm) Drywall
For installations using
5/8'' (16mm) drywall fold
the shorter tab out 90°F
(32.2°C). Use a
screwdriver if necessary.
© Travis Industries
Fonctionnement
4100326
Make sure the fireplace is
square and plumb when
placed in the framing.
Measured corner-to-
corner, the fireplace
should be square (approx.
54-7/8'' (1394mm) for each
dimension). Use shims to
insure the fireplace is
square.
TOP VIEW
Framing
Fireplace
TOP VIEW
Framing
Fireplace
11
Nailing Bracket
Drywall
Nailing Bracket
Drywall
100-01250_000
Publicité
Table des Matières
