Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
STEP 1
Remove your AeroPilates® Precision Series Reformer 535 from its packaging, placing the product on
its side. Unfold the MAIN FRAME ASSEMBLY half way as shown in the illustration.
STEP 2
Screw the RUBBER FEET(10) into the FRONT FRAME(1) and REAR FRAME(2). Unfold your
AeroPilates® Precision Series Reformer 535 to a flat position by moving the FRONT FRAME(1) away
from the platform end of the REAR FRAME(2) in a counterclockwise position until fully extended. Lower
the AeroPilates® Precision Series Reformer 535 so all four RUBBER FEET(10) are flat on the floor.
CAUTION
Keep hands clear of the hinge when folding and unfolding the unit.
!
7
Publicité
