Danby DAR023C1BDB Manuel Du Propriétaire page 6

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the hole covers from the top left side
of the cabinet. Remove the hinge cover and
the upper hinge from the top right side of the
cabinet.
2. Remove the door from the lower hinge pin by
pulling it gently upwards. Remove the door
bushing from the top right side of the door.
Remove the hole cover from the top left side of
the door. Install the door bushing on the top left
side of the door. Install the hole cover on the top
right side of the door.
3. Remove the door stopper form the bottom right
side of the door and install it on the bottom left
side of the door.
4. Remove the hinge from the lower right side of
the cabinet and remove the leveling foot from
the lower left side of the cabinet. Install the
hinge on the lower left side of the cabinet. Install
the leveling foot on the lower right side of the
cabinet.
5. Install the door onto the cabinet. Install the upper
hinge and hinge cover on the left side of the
cabinet. Place the plastic hole covers in the holes
on the top right side of the cabinet.
Note: When installing the door, ensure that the top
of the door is level with the top of the cabinet and
that the rubber gasket is making a good seal with
the cabinet all the way around.
1
2
3
4
5
5