AEG HK854400FS Notice D'utilisation page 20

20
Operating instructions
Heat setting displays
Display
-
+ digit
/ /
OptiHeat Control (3 step Residual heat indicator)
WARNING!
\ \
OptiHeat Control indicates the level of the residual heat. The induction cooking zones
make the heat necessary for cooking directly in the bottom of the cookware. The glass
ceramic is heated by the heat of the cookware.
OPERATING INSTRUCTIONS
On and Off
Touch for 1 second to start or stop the appliance.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off.
• you do not set the heat setting after you start the hob.
• you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 sec-
onds. The sound operates until you remove the object.
• the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob again,
the cooking zone must be cool.
• you use incorrect cookware.
automatically.
• you do not stop a cooking zone or change the heat setting. After some time
on and the hob stops. See the table.
The cooking zone is off
The cooking zone operates
The
The automatic heat up function is on
Power function is on
There is a malfunction
OptiHeat Control (3 step Residual heat indicator) : continue cook /
keep warm / residual heat
Lock / The child safety function is on
Not correct cookware or too small or no cookware on the cooking zone
The automatic switch off is on.
Risk of burns from residual heat!
Description
function operates.
comes on and after 2 minutes the cooking zone stops
comes