Publicité
Les langues disponibles
Les langues disponibles
ZEPHYRONLINE.COM
Installing the Anti-tip Bracket
1. Position anti-tip bracket at a minimum of 8" from the left or right of the side of the cooler.
2. Install anti-tip bracket to floor by using the supplied ST5*50 anti-tip bracket screws.
3. Push the cooler back into anti-tip bracket making sure the bracket overlaps the cooler bottom.
Setting Up the Display Rack for Your Wine Cooler
Should you desire to set up the display rack for your appliance, please follow the instructions below.
The display rack is only compatible with wine coolers, PRW24F01CG and PRW24F02CG.
1. To set up the display rack, two racks above the display rack need to be removed beforehand.
Follow the steps for removing the shelves on page 24.
2. Push underneath the display rack to lift out the front section of the rack.
3. Push and line up the legs on both the left and right side of the display rack.
4. Mount the legs of the display rack onto the split section of the back rack to lock it in place and
prevent the display rack from sliding back down.
5. Place back all the contents initially loaded on the shelf, if applicable.
PRW24F01CG, PRW24F02CG, PRB24F01BG, PRWB24F02BG
Use, Care, and Installation Guide
Installation Instructions
2
4
3
5
19
Publicité
