Publicité
Les langues disponibles
Les langues disponibles
ZEPHYRONLINE.COM
Installation Clearance Requirements
When installing the cooler, follow the recommended spacing dimensions shown.
►
For proper clearance of the electrical plug, allow at least 1" of clearance at the back as shown in
the diagram.
►
An installation next to a wall will require a minimum 2-1/4" door clearance to accommodate the
Zephyr handle.
►
The cabinet should allow at least 24" for the width and 69-3/4" for the height to accommodate
the cooler.
►
The power cable is located on the back right of the unit and has a length of 72" to accommodate
multiple outlet locations.
►
Once you are ready to install the unit, you must adjust the feet to level the coolers. An improperly
leveled drawer may not close properly.
►
The installation should allow the unit to be pulled forward for servicing, if necessary.
PRW24F01CG, PRW24F02CG, PRB24F01BG, PRWB24F02BG
Use, Care, and Installation Guide
Installation Instructions
17
Publicité
