Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
Carbon Filter
A built-in carbon filter protects your drinks by acting
as a natural barrier against harmful odors. The carbon
filter should be replaced every 3-6 months depending on
the unit's exposure level to odor. If the unit is placed in a
kitchen, regular replacement every three months is ideal.
Remove the carbon filter by turning counterclockwise to
unlock from rear panel.
Carbon Filter Replacement Part #: Z0F-C004
Installing the Door Handle
Follow the instructions below to install the contemporary handle onto your cooler. If a pro handle is
desired, the part number is PRHAN-F001.
1. Push aside the door gasket on the side you wish to install the handle. Under the gasket you will see
two designated holes for handle installation and pre-installed screws.
2. Install the handle tightly as shown with (2) M4*35 screws, (2) M4 spring washers, and (2) M4 flat
washers which are pre-installed onto the door.
Gasket
Flat Washer
Spring Washer
Screw
18
Part #: PRHAN-F001
Handle
Door Frame
PRW24F01CG, PRW24F02CG, PRB24F01BG, PRWB24F02BG
S I N G L E & D U A L ZO N E
Zephyr Presrv Pro Handle
Color: Stainless Steel
Use, Care, and Installation Guide
P R E S R V ™
F U L L S I Z E C O O L E R
Publicité
