Publicité
Les langues disponibles
Les langues disponibles
Recommendation combination:
The following combination of drawers, baskets, and shelves is recommended for energy to
be used as efficiently as possible by the refrigeration unit.
Leveling the fridge
If the fridge is not level, the door and magnetic seal
alignment will be affected and may cause you fridge to
work incorrectly. Once the fridge is placed in its final
location, adjust the leveling feet at the front by turning
them.
Cleaning before use
Wipe the inside of the fridge with a weak solution of bicarbonate of soda. Then rinse with
warm water using a damp sponge or cloth. Wash the baskets and shelves in warm soapy
water and dry completely before replacing in the fridge.
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the fridge. DO
NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30
minutes before switching back on to allow the coolant fluid to settle.
Before filling your fridge
Before storing foods in your fridge, turn the fridge on and wait for 4 hours, to make sure it is
working properly and to allow the fridge to fail to the correct temperature.
4. OPERATING YOUR APPLIANCE
Temperature Control
Your refrigerator is equipped with a thermostat located inside your appliance.
The first time you put your appliance into operation, set the thermostat to "3 - 4" and let it
run empty for 4 hours before storing food in it so that it is sufficiently cooled.
The thermostat goes from the hottest "1", to the coldest "7". Adjust the temperature as
needed. "MID" seems appropriate for use in a home or office (ambient temperature 25°C).
26
Publicité
