Costway TQ10230 Mode D'emploi page 7

Assembly
• Use a screwdriver to loosen the two screws on the top of the seat and
remove the seat.
1. Plug the Red connector on the vehicle body into the Red connector from
the battery.
2. Plug the two white connectors on the vehicle body into the white connectors
on the motor.
3. Use a screwdriver to tighten the both screws on the top of the seat into the
holes of the vehicle.
1
12
3
3
2
8
● Wash your hands before applying the labels.
● Before applying the labels, wipe the surface of the vehicle with a clean, dry
cloth to remove any dust or oils.
● Place the labels exactly as shown in the illustrations.
F
x2
Label Decoration
E
B
G
9
A
C
D
13