Safety information
• It is advisable to wait at least four hours before
connecting the appliance to allow the oil to flow
back in the compressor.
• Adequate air circulation should be around the
appliance, lacking this leads to overheating. To
achieve sufficient ventilation follow the instructions
relevant to installation.
• Wherever possible the spacers of the product
should be against a wall to avoid touching or
catching warm parts (compressor, con-denser)
to prevent possible burn.
• The appliance must not be located close to
radiators or cookers.
• Make sure that the mains plug is accessible after
the installation of the appliance.
Service
• Any electrical work required to do the servicing of
the appliance should be carried out by a qualified
electrician or competent person.
• This product must be serviced by an authorized
Service Center, and only genuine spare parts must
be used.
Energy saving
• Don't put hot food in the appliance;
• Don't pack food close together as this prevents air
circulating;
• Make sure food don't touch the back of the
compartment(s);
32
32