Publicité
Les langues disponibles
Les langues disponibles
EN
11.3 Wire feeder
Part
Pressure
Check if the pressure-adjusting handle is
adjusting
fixed and adjusted to the desired position.
handle
Check if there is dust or spatter inside the
hose or beside wire-feeding wheel.
Wire-feeding
Check if there is a diameter agreement of
hose
wire and wire-feeding hose.
Check if rod and wire feeding groove are
concentric.
Check if there is an agreement of wire
diameter and wire-feeding wheel.
Wire-feeding
wheel
Check if the wire groove is blocked.
Pressure
Check if the pressure adjusting wheel can
adjusting
rotate smoothly, and it's physically complete.
wheel
11.4 Cables
Part
Check if the cable of torch is twisted.
Torch
cable
Check if the coupling plug is in loose connection.
Check if the cable is physically complete.
Output
cable
Check if insulation damage or loose connection exists.
Check if the cable is physically complete.
Input
cable
Check if insulation damage or loose connection exists.
Check if the earth cables are well fixed and not short-
Earth
circuited.
cable
Check if this welding equipment is well grounded.
12. WARRANTY.
Duration of the guarantee period:
• 36 months, in accordance with R.D. 7/2021 of April 27, which modifies the revised text of the General Law for
the Defense of Consumers and Users (*) and other complementary laws, approved by R.D. 1/2007, of November
16.
• 12 months, for Companies or Professionals who use the product to carry out a for-profit activity.
(*) RD 1/2007. Article 3. General concept of consumer and user.
For the purposes of this rule..., consumers or users are natural persons who act for a purpose unrelated to their
commercial, business, trade or profession.
Check
Check
58
Remarks
The unfixed pressure-adjusting handle
leads to the unstable welding output.
Remove the dust.
Non-agreement of the diameter of wire
and wire-feeding hose possibly leads to the
excessive spatter and unstable arc.
Unstable arc possibly occurs.
Non-agreement of wire diameter and wire-
feeding wheel possibly leads to the
excessive spatter and unstable arc.
Replace it if necessary.
Unstable
rotation
incompleteness of the wheel possibly leads
to unstable wire feeding and arc.
Remarks
The twisted torch cable leads to
unstable wire feeding and arc.
Relevant measures should be
taken to obtain stable weld and
prevent the possible electric
shock.
Relevant measures should be
taken to prevent the possible
electric shock.
or
physically
Publicité
