Publicité
Les langues disponibles
Les langues disponibles
EN
5. GENERAL SAFETY RULES.
WARNING These instructions have been developed to facilitate the proper installation, operation
and maintenance of the equipment. Read the entire manual carefully before using the equipment, in
order to understand its features and reduce risks during its operation. Make sure to read and understand
all instructions, and to pay attention to all warnings and precautions throughout this manual. Failure to
follow the instructions contained in this manual may result in electric shock, fire and/or serious personal
injury.
5.1. WORKING AREA.
• Keep your work area clean and well lit. Messy tables and dark areas may cause accidents.
• Do not use the machine in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. The electric tool generates sparks that may cause fires.
• Make sure observers, children and visitors are away from the machine while you are working with
it. Distractions can make you lose control.
5.2. ELECTRICAL SAFETY.
WARNING
• Avoid body contact with grounded surfaces such as pipes, radiators and refrigerators. There is an
increased risk of electric shock if your body is grounded.
• Do not expose the machine to rain or wet conditions. The entry of water into the machine will
increase the risk of electric shock.
• Do not misuse the cable. Never use the cable to carry the tool, and never pull the cable out of the
outlet. Keep the cable away from heat, oil, sharp edges and moving parts. Replace damaged cables
immediately. Damaged cables increase the risk of electric shock.
• When using the machine outdoors, use an outdoor extension cord. These extensions are designed
to work outdoors and reduce the risk of electric shock.
• Damaged power cords must be replaced immediately.
KEEP THESE INSTRUCTIONS.
49
Publicité
