Publicité
Les langues disponibles
Les langues disponibles
US
LCD Screen
•
Power Level Percentage
Check the battery level by pressing the display button before use. If battery is at a low level,
charge first. LCD screen flickers around 10 times when the battery capacity falls to 20% to 10%.
Power of Input Output (W)
Please ensure that power consumption is less than 200W, then press the power button.
If the Jackery Explorer's total output exceeds 200W, it will shut off.
Low & High Temperature Alarm
The E240 can power your devices at temperatures ranging from -10~40℃.
If your working temperature is outside this range, the unit may stop working.
Other
•
How to reset the Explorer 240
Please try to hold the display power button for 8s to reset the battery.
When should we need to reset the power station?
When the power station can't work properly, you can choose to reset the battery.
Fan Operating Principle
E240 uses intelligent temperature control. When the AC is turned on, the fan does not turn
on.Only when the temperature rises to a certain degree then the fan starts to turn on.
Attention
•
Input Power
Output Power
If you operate the power station in improper way, there will be appearing symbols on LCD screen.
Battery has been drain out
It shows that the battery has been drain out.
Please kindly charge it to 100% and then use it.
Warning: It's suggested to recharge the battery
before the power drops below 15%. Please don't
drain out the battery.
High
Temperature
It shows that the battery is used in a high or low
temperature. Please charge, use and store the
E240 within an ambient temperature 0℃-40℃
(32°F-104°F).
04
Low
Temperature
Battery was overcharged
It shows that the battery was overcharged.
Please try to hold the display power button for 8s
to reset the battery and try to charge to see.
Over-loaded
It shows that the power station is over-loaded,
please kindly check the power of your device and
hold the display power button for 8s to reset the
battery and try to charge to see.
Power Display
Publicité
