INVENTOR CB-WUI-20L Manuel D'utilisateur page 32

How much time is
needed to dry my
clothes?
The dehumidifier is
not a chilling device.
What could be the
cause of cold air
being extracted?
Why is the
dehumidifier
making some noise
from time to time?
Why does the
dehumidifier not
operate while the
humidity of the
room has increased?
The unit does not start
Make sure the dehumidifier's plug is placed completely into the socket.
l
Check the house fuse/circuit breaker box.
l
Check whether the power cord is damaged.
l
Check the water bucket, if it is full, empty it.
l
Check if the dehumidifier has reached its preset level.
l
Make sure the water bucket is positioned properly.
l
Room temperature is lower or higher than the advised operational range.
l
Check whether the humidity level has been set in high levels.
l
Dehumidifier does not dry the air as efficient
The humidity level is too high. Make sure that the dehumidifier has been operating enough
l
time to remove the moisture.
Make sure there are no curtains, blinds or any other obstacles blocking the front or back of
l
the dehumidifier.
The humidity selector may not be set low enough.
l
Make sure you have cleaned the filter as suggested. Clogged filter may result in reduced
l
performance.
32
The exact time needed to dry clothes depend on many
factors, the room's temperature and size, the humidity level,
the moisture of the clothes etc., so there is no standard time
since of these variable factors mentioned above To shorten
the time period, place the dehumidifier in a small room with
all doors and windows shut. The smaller the room the more
efficient the drying operation will be.
The dehumidifier operates by intaking condensed air
removing any moisture and sending it back in the area it
operates. If you are standing near the dehumidifier while
operating you may feel that the air coming out of the fan is
cooler due to the diffusion. In reality, it is at the same room-
temperature but with less humidity.
When the compressor starts or stops operating, the unit may
make a loud noise, it is normal.
When the set humidity is reached, the Energy Savings
function is automatically activated during which the digital
control display of the device may show increased humidity
levels. This is because the fan is not operating. After the
predetermined timeframe and if the humidity levels have
increased, the device will resume dehumidification.
EN