Publicité
Les langues disponibles
Les langues disponibles
FILL LEVEL
The dehumidifier offers you the opportunity to select the maximum water level inside the water
tank. Press the fill level button to control the water tank capacity based on your daily needs.
There are four level capacity options in this dehumidifier, indicated by numbers 1, 2, 3 and 4 on
the control panel. A led light below each option on the control panel will turn on to indicate the
level that you have selected each time.
Auto Defrost
When frost builds up on the evaporator coils, the compressor will cycle off and the fan will
continue to run until the frost disappears.
• This function not only ensures the safe and appropriate operation of the
dehumidifier but is also more efficient and economical in its performance
• When Auto Defrost is operating, the unit may cause some noise
of the refrigerant fluids flowing, this is normal.
• Do not turn the dehumidifier off when auto defrost is operating.
INDICATIONS
HUMIDITY LIGHT INDICATOR
The humidity light indicator on the front side of the dehumidifier will inform you about the level
of ambient humidity inside the room.
• When the ambient humidity is over 70%, the light indicator will turn red.
• When the ambient humidity is between 45% - 70%, the light indicator will turn yellow.
• When the ambient humidity is below 45%, the light indicator will turn green.
P2 - Bucket Full Indicator
The indicator "P2" will appear on the led display when bucket is full, removed, or misplaced.
• The dehumidifier will shut down automatically when the water tank is full.
EN
You can activate or deactivate the humidity light indicator by
pressing simultaneously for 2 seconds the Fan button and the
Up button (
).
25
Publicité
