Krups SAVOY ET451050 Mode D'emploi page 9

KR_CAFETIERE_SAVOY_M5_NC00132236_Mise en page 1 14/04/2016 08:59 Page11
■ Press the TURBO button. Fig. 15
■ The TURBO icon will appear on the screen.
■ This function will be saved in the memory of your coffee machine for future cycles. You can stop this
function by pressing the TURBO button once more.
6C – REGULAR OR BOLD
■ This feature allows you to make a coffee that is more or less full-bodied.
■ The BOLD feature increases the time of the cycle for a stronger coffee.
■ Press the REGULAR or BOLD button to select the intensity of your coffee. Fig. 22.
■ The REG or BOLD icon appears on screen.
■ The feature is stored in the memory for subsequent cycles.
6D – 1- 4 CUPS
■ To activate this feature, press the 1-4 button (n) before starting the cycle. Fig. 23.
■ This feature is especially designed for making small amounts of coffee, i.e. between 2 and 4 cups. It makes
it easier to extract optimal aroma and flavor.
7. CLEANING
■ To dispose of used ground coffee, remove the filter and the filter holder of the coffee maker. Fig. 24a-b
and 25a-b.
■ Do not clean the appliance if it is still hot.
■ Wash the carafe, the removable filter holder and the permanent filter with warm, soapy water. You may place
the carafe in the dishwasher.
CAUTION: Do not place the carafe in the microwave.
Do not put other parts of the coffee maker into the dishwasher.
■ Clean the coffee maker with a damp cloth or sponge. Never use abrasive or strong products on any part
of the coffee maker.
■ To clean the stainless steel parts of your coffee maker, dampen a soft cloth or sponge with warm water.
Wipe carefully with a dry cloth.
■ For difficult stains, use a cloth with white vinegar.
■ Do not immerse the appliance in water or under the tap.
8. DESCALING
■ Why descale
- Limestone forms naturally in your coffee maker. Descaling preserves the coffee maker and ensures it will last
longer and provide quality coffee over time. Limestone can permanently affect the machine's performance.
Malfunctions associated with scaling will not be covered by the warranty if the product is returned.
■ When to descale
- When descaling is necessary, your machine will tell you and the CLEAN icon will appear on screen.
- However, the descaling frequency depends on the hardness of the water and the number of BREW cycles.
It may be necessary to descale your coffee machine if you notice the following signs, even if the CLEAN
message does not appear on the screen : longer cycle time, excessive steaming, more noise at the end of
the cycle, stopping mid-cycle ; this means that your machine needs to be descaled.
- Descaling should be done about once a month, depending on the hardness of the water.
How to descale your KRUPS coffee maker
■ Remove the filter cartridge. Fig. 26.
■ Use the KRUPS descaling solution® or 5 fl. oz of white vinegar diluted in 17 fl.oz of cold or water at room
temperature or 1.5 oz of citric acid diluted in 17 fl. oz until the crystals have completely dissolved. Fig. 27.
■ Pour the solution into the water tank (without coffee). Fig. 28.
11