Publicité
Les langues disponibles
Les langues disponibles
Unit Securing Fastener Kit
Barbed plugs (2x)
STEP 2 ATTACHING THE BARBED
PLUGS
Illustrations may differ from your purchased appliance.
31-1000764 Rev. 0
Appliance Preparation
Cabinet depth alignment gauge (4x)
Before rolling into
the cavity, insert
a barbed plug into
the large holes at
the top right and
left sides of the
appliance.
The plugs protect
the inside surface of
cabinetry from
being damaged
by screws when
pushing in the
appliance.
Required Tools
Cross-head screwdriver
STEP 3 ATTACHING THE DEPTH
ALIGNMENT GAUGES
Place the alignment gauge by inserting the screw
head through the keyhole of the gauge.
Push the alignment gauge down to lock the position.
Tighten the screw just enough to firmly hold the
gauge.
• The alignment gauges are only temporary and
must be removed after installation.
23
23
Loosen the right and left
screws at the top and bottom
sides of the door.
Locate the alignment gauges
at correct orientation to the
right and left screws.
Left
Right
Publicité
