REVAMP Professional dynamic RADIANCE X SHINE DR-6400GD-GB Mode D'emploi page 3

INSTRUCTIONS FOR USE
• Wash your hair as normal and squeeze out excess moisture with a towel and comb
through to detangle.
• Apply heat protection spray before drying.
• Plug the product into a 220-240V mains power supply.
• To quickly blast dry hair, use without any attachments.
• For precision drying and styling, please use the styling attachments as recommended
in the section above.
• Turn the dryer on and off by switching the POWER button at the back of the handle.
• To adjust the temperature, simply press the heat control button and choose 60°C,
90°C or 120°C.
• Medium to high heat and speed settings are for drying the hair. Medium to low heat
and speed settings are for styling the hair using the styling attachments.
• Press and hold the cold shot button at the top front of the handle for a cool burst of air
to set your style.
• Speed and temperature levels are indicated on the LED display of the dryer:
SPEED
Low speed
Medium speed
High speed
• After use, switch off the dryer, unplug and
allow to cool before storing away.
• For easy storage, twist the handle to make
the dryer more compact in size. (Fig. 1)
Follow us on revamphair.com for the
latest hair tips and advice.
CLEANING & MAINTENANCE
• Switch the appliance off, unplug from the
mains and allow to cool fully before cleaning.
• Wipe over all surfaces using a soft damp
cloth. Do not use harsh abrasives or cleaners.
• Do not immerse the appliance in water or any
other liquid.
• Ensure all parts are dried thoroughly with a
soft towel before reusing.
• To prevent cord damage, do not wrap the
cord around the appliance, always store the
cord loosely next to the appliance.
• Store in a cool dry place.
Autocleaning Function
The Revamp Dynamic Radiance x Shine
digital intelligent ionic hair dryer features an
AUTOCLEANING function to help clean the
rear filter.
Turning the Autocleaning Function on:
Once the hair dryer is turned off, press and hold the speed control button (feature 3) for
5 seconds. The motor will then put the cleaning system into operation for 20 seconds.
Removing & Cleaning the Filter
To maintain peak product performance and to prolong motor life, it is important to
regularly remove dust and dirt from the rear grille and clean it (Fig. 2)
• Turn the device off and unplug it before removing the filter.
• To remove - Turn the rear-grille anti-clockwise (as indicated on the grille) and pull off.
• To clean - Clean with a soft brush and replace.
• To replace - Align the grille guides with the slots in the casing (on the dryer) and turn
clockwise.
HEAT
Low heat
Medium heat
High heat (for faster
drying)
Fig. 1
Fig. 2
GB - 3