Important; Technical Data; Spare Parts - KURIS KVS 900 Instructions De Service

Important!

Please read these operating instruction before starting your new KURIS vertical cutting machine. You
thus simplify your task and avoid operating errors. The operating instructions should be kept by the
operator.
Areas of Application of KURIS Vertical Cutting Machines:
For cutting textiles of all types. However, especially for cutting thick layers, bends of small radii and
acute angles.

Technical Data:

Model:
Cutting Depth. in cm:.......................................................................9
Motor power Watts/RPM :
Blade travel mm: ..........................................................................36
Running noise dB(A), measured at a distance of 1 m when idling: ..........70
Vibration m/s : .................................................................... <
Net weight Kg:
Maintenance:
Always keep the machine clean. Worn cables as well as damaged plugs and switches are to be
replaced immediately (accident prevention). It is recommended to allow your KURIS factory
representative to perform the annual maintenance.

Spare Parts:

For subsequent delivery of spare parts and accessories, please contact your KURIS factory
representative or the factory directly.
When ordering spare parts, we require the following information:
1) Machine type
2) Machine number
3) Part number
4) Quantity
Spezialmaschinen GmbH
Operating Instructions
Edition: English
three-phase 380/440 V
KVS 900
250/2800
2,5
8,3
11
KVS 900
single-phase 240 V
180/2800
8,4