Télécharger Imprimer la page

Revitive ESSENTIAL Manuel De L'utilisateur page 10

Publicité

Les langues disponibles

Les langues disponibles

Instructions for use
R
f
Remove the plastic liner from the Body Pads, by
peeling it off carefully. Replace the Body Pads onto
the plastic liner after use.
R
g Press the Body Pads on the area you wish to apply
electrical stimulation to, as shown on page16, gently
R
pressing the adhesive side against the skin.
R
h Press the power button on the Revitive.
You will hear a beep and the display lights will read
To turn off the device at any time during
operation, press the power button.
i
Press the
start stimulation.
Press the (+) button to increase the level.
Press the (–) button to decrease the level.
j
Ensure you familiarize yourself with the feeling of
Electrical Muscle Stimulation (EMS). Use on a low
intensity for 30 minutes once per day for a
few days.
18
5827_IFU01_17102527.indd 18-19
5827_IFU01_17102527.indd 18-19
R
R
R
30 minutes.
R
(+) Intensity Control, one time, to
R
R
R
Set the intensity at a level you can feel the stimulation
or see your muscles twitch.
It is normal to feel tingling or varying sensations in
your muscles you are treating.
k After a few days of familiarization, use a higher intensity
that provides you with strong but comfortable muscle
contractions.
You can set the intensity between 1-50.
Please note that the intensity required may vary from
day to day.
If you feel pain or discomfort:
• Lower the intensity of the Body Pads using the
Control.
• You can also choose to stop therapy before the end of the 30 minute
session to avoid skin irritation. You can do this by pressing the
power button.
l
The
Time display will start to count down in
minutes as Revitive cycles through its program.
m When Revitive times out, the
00 and you will hear three beeps, and the device will
switch itself off automatically.
EN
(–) Intensity
Time display reads
19
27/02/2020 11:25
27/02/2020 11:25

Publicité

loading