Publicité
Les langues disponibles
Les langues disponibles
UNPACK AND OPERATION
Before usage, observe our recommendations and safety
instructions.
UNPACK
1. Remove small parts, loose packing material out of the box
and then take out with help of a second person the preassem-
bled frame of packaging.
CHECKS AND HOW TO START
1. When everything is in order, connect the power supply ca-
ble (25) with wall power (220-240V~50-60Hz) and socket on
the main switch (39) below the front frame.
2. The computer will show normal manual mode. Carefully
remove the protective film from the display. Insert the battery
39
TRANSPORT AND STORAGE
1. Turn off the walkingpad and dis-
connect the power cord.
2. Lift the walkingpad at the rear
end until the it stands on the front
transport rollers (30). So you can
easy move it.
3. Choose a dry indoor storage lo-
cation. You can store the walking-
pad lying down or leaning against
the wall in an upright position on the
stand up foots (3). Cover the device
to protect it from discoloration from
possible sunlight and dust.
5
16
13
into the remote control (5), respecting the polarity, or pull out the
plastic battery separator. Press [ ] button and after a 3 sec. Count
Down the treadmill (39) start moving.
3. Start walking onto the walk surface (39) when speed is slowly
and follow the speed. Familiarize yourself with the machine at low
speed settings. Walk in the middle of the running surface (39).
Don't step on the side foot rails (13+16). Only walk with look at the
computer (8) on the walkingpad during the walk. In emergency
case, step of the walkingpad lateral.
Note: Please keep the tool set and the instructions in a safe
place as these may be required for repairs or spare parts
orders becoming necessary later.
25
8
12
GB
3
30
22
Publicité
