Maintenance; Accessories - Wohler TD 100 Mode D'emploi

Maintenance

9 Maintenance
3
1 paper tear-off bar
2 print head
3 paper sensor
10

Accessories

Thermopaper, 57 mm, 10 rolls
22
1
2
Periodically and after a long print, it may
be necessary to clean the print head,
the paper sensor and the platen roll.
• Open the cover of the paper com-
partment and remove the paper.
• Loosen dirt particles at the paper
sensor and tear of bar with a small
soft brush.
• Soak a Q-tip in isopropanol (IPA)
and gently clean the print head.
ATTENTION!
Never use sharp objects for cleaning.
This might cause damage to the print
head.
part n° 4145