Operation; Power On And Off; Receiving Data And Printing; Feed Paper - Wohler TD 100 Mode D'emploi

Operation

7 Operation
7.1

Power on and off

7.2 Receiving data
and printing
7.3

Feed paper

20
(SN) and the firmware version.
• Press the POWER button to turn the printer on
and off. The POWER button shines green
when the power is on.
You can now start to send the data from the
measurement instrument to the printer.
Place the printer with the IR receiver (3) toward
the transmitting instrument.
NOTE!
The distance between the transmitting instrument
and the printer should be 0,30 m approx. and the
angle should not exceed ± 15°. Take care that
there is no object between the printer and the
transmitting instrument.
• When the printer is switched on, press the
FEED PAPER button (▲) to feed the paper.
• For continuously feeding paper, just hold
down the FEED PAPER button (▲).