Télécharger Imprimer la page

Publicité

Liens rapides

320
(1' - 19/32")
300
(11 13/16")
Ø22
(Ø55/64")
MAX. 165 mm - MIN. 125 mm
(max. 6 1/2" - min. 4 59/64")
G 1/2"
G 1/2"
352
(1' - 1 55/64")
Ø40
(Ø 1 37/64")
81
(3 3/16")
MIL96
_ REV10
MIL96/MILO360
AISI 316L STAINLESS STEEL
Gruppo miscelatore esterno a parete, con funzione di mensola,
completo di bocca di erogazione orientabile
Wall mounted mixer set, without built-in part, usable as shelf,
with adjustable spout
CEA DESIGN STUDIO
Rompi-getto, utilizzabile per il riempimento vasca
Flow straightener, suitable for bathtub
Portata aeratore 5 l/min / 1.3 gpm, risparmio idrico
Flow rate aerator 5 l/min / 1.3 gpm, water saving
MANUTENZIONE / MAINTENANCE
acido clorico e muriatico
HCl
cloric and muriatic acid
acido fluoridrico
NON UTILIZZARE
HF
DO NOT USE
hydrofluoric acid
ipoclorito di sodio
NaCl O
chlorine bleach
detergente a pH neutro
UTILIZZARE
pH
TO USE
7
neutral pH detergent
Questi disegni sono proprietà di CEADESIGN SRL s.u. pertanto non potranno
essere utilizzati e/o comunicati a terzi, anche in forma parziale, senza preventiva
autorizzazione. CEADESIGN SRL s.u. si riserva il diritto di apportare modifiche ai
disegni al fine di migliorare il prodotto.
CEADESIGN SRL s.u. has the property rights on these drawings, therefore they
cannot be used and/or transferred to third party, even in partial form, without any
prior authorization. Furthermore CEADESIGN SRL s.u. reserves the right to apply
any change to these drawings in order to upgrade the product.
ceadesign.it

Publicité

loading

Sommaire des Matières pour CEA MIL96

  • Page 1 (3 3/16”) Wall mounted mixer set, without built-in part, usable as shelf, (Ø55/64”) with adjustable spout CEA DESIGN STUDIO Rompi-getto, utilizzabile per il riempimento vasca Flow straightener, suitable for bathtub Portata aeratore 5 l/min / 1.3 gpm, risparmio idrico MAX. 165 mm - MIN. 125 mm Flow rate aerator 5 l/min / 1.3 gpm, water saving...
  • Page 2 MIL96 MAX. 4 mm _ REV10 (max. 5/32”) MIN. AVVERTENZE TECNICHE Risciacquare bene le tubazioni prima del montaggio ed evitare sbalzi di pressione fra i raccordi d’acqua fredda e d’acqua calda. In caso di pressioni statiche superiori a 5 bar si raccomanda MAX.
  • Page 3 MIL96 _ REV10 PULIZIA / CLEANING / SAUBEKEIT / LIMPIEZA / NETTOYAGE Le portate indicate sono alla pressione consigliata di 3 bar The indicated flow rates are at the recommended pressure of 3 bar AERATORI IN DOTAZIONE / AERATORS INCLUDED Rompi-getto a flusso libero / Free flow aerator (20,5 l/min / 5.4 gpm)
  • Page 4 MIL96 Conservare gli strumenti inclusi nel prodotto e utilizzati _ REV10 per l’installazione perchè riutilizzabili per i ricambi. Please, keep the tools included in the item pack and employed for its installation, to re-used them for the spare RICAMBI / SPARE PARTS parts.

Ce manuel est également adapté pour:

Milo360