Télécharger Imprimer la page
Masquer les pouces Voir aussi pour MILO360 MIL109:

Publicité

Liens rapides

Ø40
(Ø1 37/64")
Ø20
(Ø25/32")
Ø45
(Ø1 49/64")
68
(2 43/64")
102
(4 1/64")
L. 600 mm
(1' - 11 5/8")
G 3/8"
MIL109
35°
MIL109/MILO360
AISI 316L STAINLESS STEEL
Rubinetto per lavamani con connessione monoacqua
Pillar tap for hot or cold water connection
CEADESIGN STUDIO
Portata aeratore 5 l/min / 1.3 gpm, risparmio idrico
Flow rate aerator 5 l/min / 1.3 gpm, water saving
MANUTENZIONE / MAINTENANCE
acido clorico e muriatico
HCl
cloric and muriatic acid
acido fluoridrico
NON UTILIZZARE
HF
DO NOT USE
hydrofluoric acid
ipoclorito di sodio
NaCl O
chlorine bleach
detergente a pH neutro
UTILIZZARE
pH
TO USE
7
neutral pH detergent
Questi disegni sono proprietà di CEADESIGN SRL s.u. pertanto non potranno
essere utilizzati e/o comunicati a terzi, anche in forma parziale, senza preventiva
autorizzazione. CEADESIGN SRL s.u. si riserva il diritto di apportare modifiche ai
disegni al fine di migliorare il prodotto.
CEADESIGN SRL s.u. has the property rights on these drawings, therefore they
cannot be used and/or transferred to third party, even in partial form, without any
prior authorization. Furthermore CEADESIGN SRL s.u. reserves the right to apply
any change to these drawings in order to upgrade the product.
_ REV12
ceadesign.it

Publicité

loading

Sommaire des Matières pour CEA MILO360 MIL109

  • Page 1 MIL109 Ø40 (Ø1 37/64”) (2 43/64”) _ REV12 Ø20 (Ø25/32”) Ø45 35° (Ø1 49/64”) (4 1/64”) MIL109/MILO360 AISI 316L STAINLESS STEEL Rubinetto per lavamani con connessione monoacqua Pillar tap for hot or cold water connection CEADESIGN STUDIO Portata aeratore 5 l/min / 1.3 gpm, risparmio idrico Flow rate aerator 5 l/min / 1.3 gpm, water saving L.
  • Page 2 MIL109 _ REV12 H (mm) AVVERTENZE DI INSTALLAZIONE L’altezza ottimale di installazione del prodotto si determina in base all’altezza dell’utente e del lavabo. 5 l/min La rappresentazione ha valore puramente indicativo. 1.3 gpm INSTALLATION WARNINGS Each individual product has to be installed and adjusted to suit the user’s and the washbasin height.
  • Page 3 MIL109 _ REV12 AVVERTENZE TECNICHE Risciacquare bene le tubazioni prima del montaggio. In caso di pressioni statiche superiori a 5 bar si raccomanda l’installazione di un riduttore di pressione per evitare danni alla cartuccia. TECHNICAL WARNINGS The pipes have to be rinsed thoroughly before installation. Use of a pressure reducer when static pressure is higher than 5 bar to avoid dammage of the cartridge.
  • Page 4 MIL109 Conservare gli strumenti inclusi nel prodotto e utilizzati _ REV12 per l’installazione perchè riutilizzabili per i ricambi. RICM054 Please, keep the tools included in the item pack and KD/Z/P/X - S/L* employed for its installation, to re-used them for the spare RICAMBI / SPARE PARTS parts.