Hilti SF 2-A12 Mode D'emploi page 23

Description
1
Product overview
Keyless chuck
@
Torque setting ring
;
Function setting ring (only SF 2H ­A)
=
Gear selector switch
%
Forward/reverse switch with switch-on
&
interlock
Intended use
The product described is a hand-held cordless drill / driver for driving and removing screws, drilling
in metal, wood and plastic.
▶
Use only Hilti Li­Ion batteries of the B 12 series with this product.
▶
Use only Hilti battery chargers of the C4/12 series for charging these batteries.
Charge status display
The charge status of the Li­ion battery is displayed after pressing the release button.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
Battery charge status cannot be displayed while the control switch is pressed.
Overload and overheating protection
The power tool is equipped with an electronic system to protect against overloading and overheating.
The power tool switches itself off automatically in the event of overloading or overheating. After
releasing the control switch, the power tool may not restart immediately when the switch is pressed
again (while the power tool is cooling down).
Overloading or overheating are not indicated by the charge status display.
Items supplied
(Hammer) drill / driver, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store
or at: www.hilti.group
Technical data
Technical data
Product generation
Rated voltage
Weight in accordance with EPTA proce-
dure 01
Speed
*2235269*
SF 2-A12
02
10.8 V
1.1 kg
1st gear 0 /min ... 400 /min
2235269
Grip
(
LED light
)
Belt hook (optional)
+
Battery state of charge indicator
§
Battery release button
/
Control switch with speed control
:
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
SF 2H-A12
02
10.8 V
1.2 kg
0 /min ... 400 /min
18