Hilti SF 2-A12 Mode D'emploi page 19

The numbers in illustrations refer to important work steps or to components important for
the work steps. In the text, the corresponding numbers draw attention to these work steps
or components, e.g. (3).
Item reference numbers are used in the overview illustration and refer to the numbers used
in the key in the product overview section.
This symbol is intended to draw your special attention to certain points for handling the
product.
Product-dependent symbols
Symbols on the product
The following symbols can be used on the product:
The power tool supports near-field communication (NFC) technology, which is compatible
with iOS and Android platforms.
Li-ion battery
Hilti Li-ion battery type series used. Observe the information given in the section headed
Intended use.
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in
any other way.
Rated speed under no load
Revolutions per minute
Direct current (DC)
Screwdriving
Drilling without hammer action
Drilling with hammer action (hammer drilling)
Safety
General power tool safety warnings
WARNING Read all safety warnings, instructions, illustrations and specifications provided
with this power tool. Failure to follow all instructions listed below may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
Work area safety
▶
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
▶
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
▶
Keep children and bystanders away while operating a power tool. Distractions can cause you
to lose control.
Electrical safety
▶
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
*2235269*
2235269 14