Publicité
Les langues disponibles
Les langues disponibles
Bluetooth player operation
1. Enter the smart device manual and open the Bluetooth function to
search the new Bluetooth devices.
2. Will find the bluetooth named like (IMCM-XXXX), choose it to pair
with the massage chair.
3. Turn on the Music Player in the smart device.
Turn off the power and stop massage
1.When pressing the power button during the massage, it will stop all
the massage functions immediately, the backrest and leg mechanism
will go back to the default position. Or when the massage time is up,
all the massage function will stop, the backrest and leg mechanism will
not go back to the default position.
2.Cut off the power of the whole machine. Figure (switch power off)
Turn off the switch
Unplug the adapter
from socket
Cleaning and maintenance
Leather and plastic cleaning
■ Use soft cloth to clean leather and plastic parts.
■ Never use chemicals such as thinner, benzine, etc. to clean the unit.
■ When using commercially available skin care products (wipes),
follow their instructions.
■ If the PVC leather is particularly dirty, wipe it in the following ways:
26
Unplug the power
cord
•Dip a soft, dry cloth in water or warm water containing 3% to 5%
neutral detergent and wring it thoroughly.
•Clean the leather and plastic parts.
•Wipe off the cleaning solution with damp cloth.
•Then wipe it with a dry soft cloth.
•Let it dry naturally.
■ When stains are difficult to remove, soak commercially available
melamine foam in neutral detergent and wipe the unit with it.
■ Do not use a hair dryer to dry the surface.
■ Because the color of the cloth will stain the surface of the PVC
leather, be careful when wiping the unit with denim and colored cloth.
■ Do not keep leather in contact with plastic for a long time, as this will
cause discoloration.
Troubleshooting
Fault
When the calf mechanism or the backrest reaches a
certain position, press the corresponding adjustment
button and it will no longer change, and a continuous
"beep, beep" sound will be emitted.
Solution
Due to product structure design and ergonomic
requirements, this product has a limited protection
design for the limit state of attitude adjustment.
At the same time, a reminder sound will sound when
the limit is reached.
27
Publicité
