2.3 Ventilation
The MLWC82ZG and MLWC82GR is already equipped with a vent slot on the
front side. This model is also recessed to fit a kitchen plinth. If fitting a kitchen
plinth is desired, please remove the air grid by removing both screws in front.
A 55mm high vent slot is required in the plinth to ensure air is able to ventilate
properly. See the diagram below.
Failure to include this vent slot will invalidate the guarantee. Please note that
the appliance doesn't come with a grille which slots-onto the kitchen plinth.
2.4 Appliance dimensions
33
55
Min.
105
MLWC82GR
12