Panasonic CZ-RTC6 Instructions D'installation page 4

zDo not use the remote controller at the following locations.
z
• Location where condensation occurs
z
• Location where fl ammable gases, etc. may leak
z
• Location where corrosive gases, etc. may leak
z
• Location with lots of water or oil droplets
z
(including machine oil)
• Location where voltage fl uctuation frequently occurs
z
• Location where there is a machine producing
z
electromagnetic radiation
• Location where droplets of organic solvents spread
z
• Location where acidic or alkaline solutions or special
z
sprays are frequently used
zDo not operate with wet hands.
z
zDo not wash with water.
z
NOTICE
The English text is the original instructions. Other languages are translations of the
original instructions.
Part Names (Control panel)
1) LCD screen
2) Menu button
● When pressed repeatedly
during operation, this shows
operating status confi rmation,
set temperature, operation
mode, fan speed, fl ap, and
the menu screen.
● The menu screen is
displayed if you press while
stopped.
3) Up/Down
buttons
Selects an item.
Note
Press centre
4
(EN)
All manuals and user guides at all-guides.com
CAUTION
4) Enter button
Fixes the selected
content.
5) Start/Stop button
Starts/Stops operation.
No pen No glove