JVC D-ILA DLA-M15U Manuel D'instructions page 31

Basic Operations (Cont.)
Projector button
STAND BY
OPERATE
LAMP
TEMP
EMERGENCY
VIDEO
COMPUTER
SETTING
+ 3
QUICK
ALIGN.
- 2
Remote control unit
OPERATE
COMPUTER VIDEO
T
VOL.
ZOOM FOCUS
W
MENU/ENTER
PAGE
BACK
PRESET
QUICK AV
ALIGN. MUTING
PRESET button
30
SETTING button
MENU/ENTER button
To display the SETTING menu
The setting menu is used to make basic adjustments and settings
(TRACKING, PHASE, H. POS., V. POS., FOCUS, ZOOM and
AUDIO-VOL.) of the video picture being projected after installation
(connection) or after inputs are switched. For operating the setting
menu, refer to "Making Basic Settings" on page 31.
• Press the projector's SETTING button.
The setting menu is displayed on the screen.
Projector
SETTING
To display the MAIN menu
The main menu is used to adjust or set the projected video picture
and the projector's condition, etc. (PIXEL CLOCK, POSITION,
PICTURE, SOUND, OPTIONS, SOURCE, DECODER and
LANGUAGE). For operating the main menu, refer to pages 34 to
47.
• Press the remote control's MENU/ENTER button.
The main menu appears on the screen.
Remote control unit
MENU/ENTER
Note
• To change the menu language displayed
English is set when the projector is shipped from the factory. The language
displayed can be selected from the following six languages:
(Japanese), ENGLISH, DEUTSCH (German), ESPAÑOL (Spanish),
ITALIANO (Italian), and FRANÇAIS (French). However, some words such
as "QUICK ALIGNMENT" are displayed only in English. Pronouns such as
line display and source display are similarly treated.
To use the remote control's PRESET button
The PRESET button is used for adjustments made on the main
menu or setting menu.
• When resetting only the selected settings to the factory-set
values, press the remote control's PRESET button.
Only the selected item's setting is reset to the factory-set value.
Remote control unit
PRESET
Notes
• This button works only for numeric values. It does not work for switching
between ON and OFF.
• For items such as PIXEL CLOCK (TRACKING and PHASE), POSITION (H.
POS. and V. POS.), SOUND (TREBLE and BASS), both settings are reset
at the same time.