Publicité
Les langues disponibles
Les langues disponibles
• The screws for installing the Wall-Mount
Bracket to the TV are not supplied.
• The length of the screw for Wall-Mount
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
10 mm – 12 mm
Screw (M6)
Wall-Mount Bracket
VS
• Refer to the following table for
wall-mount hole pattern.
Model Name
KD-85X85K /
85X80K /
85X80CK
KD-75X85K
KD-65X85K
KD-55X85K
KD-50X85K
KD-43X85K
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
Note
• Read the supplied safety documentation for
additional safety information.
• For more detailed information, visit Sony
Customer Support website.*
* Only for limited region/country/model.
8
US
Wall-mount hole
pattern
×
400 × 400 mm
300 × 300 mm
300 × 300 mm
300 × 300 mm
200 × 200 mm
200 × 200 mm
1
Remove the screws from the rear of
the TV.
2
Attach the Wall-Mount Attachment
(supplied with the TV) to the rear of
the TV (to make it parallel with the
wall).
3
Attach the Wall-Mount Bracket (not
supplied) using the screws (not
supplied).
VS
1.5 N·m
{15 kgf·cm}
Wall-Mount Bracket
(not supplied)
Screw
(not supplied)
Publicité
