Dragon Touch VISION 3 Manuel D'utilisation page 21

EN
Remote
When the camera is turned on, it will be automatically connected to the remote. You
can control the camera to take photos or record videos using the remote.
Video
To record video, first make sure the camera is in Video mode.
To start recording, simply press the gray video button. The camera will emit one
beep with the working indicator light flashing.
To stop recording, simply press the gray video button again. The camera will emit
one beep with the working indicator light turned off.
Photo
To capture a photo, first make sure the camera is in Photo mode, then press the
video button. The camera will emit a camera shutter sound.
Replacing the CR2032 battery of the remote
1. Use a screwdriver to remove the four screws on the back, cover of the remote,
allowing you to open it.
Photo Button
Video Button
19
Note: The remote is not waterproof
but splashproof only.