Dragon Touch VISION 3 Manuel D'utilisation page 13

EN
General Settings
On the general settings screen, press the Down button to choose a setting from the
available options, then press the OK button to confirm your selection and change
the setting.
1. Exposure
-3 / -2 / -1 / 0 / 1 / 2 / 3 (Default setting: 0)
By default, your camera utilizes the entire image to ascertain the optimal exposure
level. This feature proves particularly beneficial when capturing shots where a
crucial region may otherwise be excessively over- or underexposed. Upon adjusting
this setting, the display promptly reflects the impact on your image. It's important to
note that if you change the mode, the camera will return to employing the entire
image for determining the correct exposure level.
2. White Balance
Auto / Sunny / Cloudy / Incandescent / Fluorescent (Default setting: Auto)
White Balance can adjust the color temperature of videos and photos, make it
perfect for use cool or warm lighting conditions. Upon adjusting this setting, the
display promptly reflects the impact on your image.
3. Wifi
Off / On (Default setting: Off)
You can choose to enabled Wifi in this setting.
Tip: You can also press and hold the Wifi button to turn on Wifi in Video or Photo
Mode. The camera will then enter Wifi mode and display the Wifi information.
4. Image Rotation
Off / On (Default setting: Off)
This setting determines the orientation of your video and photos, helping to prevent
upside down footage.
Note: The user interface will be upside down when this feature is enabled.
5. Driving Mode
Off / On (Default setting: Off)
In this mode, the camera will automatically record video and save the video file
when you connect it to the cigarette lighter and start your car engine.
11