Dragon Touch VISION 3 Manuel D'utilisation page 14

EN
6. Light Source Frequency
Auto / 50Hz / 60Hz (Default setting: Auto)
You can set the light source frequency to avoid the "water ripples" phenomenon
(light waves) while capturing indoors.
7. LED Indicator Light
Off / On (Default setting: Off)
If you choose to turn this setting off, the indicator light will not turn on when the
camera is working or is charging.
8. Auto Screensaver
Close / 10s / 20s / 30s (Default setting: 30s)
Auto Screensaver turns off the LCD display after a period of inactivity to save battery
life. To turn the display back on, simply press any button of the camera.
9. Auto Shutdown
Closed/1 min/3 min/ 5 min (Default setting: 3 min)
Auto Shutdown will power off your Vision 3 after a period of inactivity to save battery
life.
10. Time Watermark
Off / On (Default setting: On)
With this setting enabled, a watermark will be added to the video or photo.
System Settings
On the system settings screen, press the Down button to choose a setting from the
available options, then press the OK button to confirm your selection and change
the setting.
1. Language
简体中文, 繁體中文, English, 日本語, Deutsch, Français, Italiano, Español, Português,
Русский, 한국어 (Default setting: English)
You can choose the system language for your Vision 3 action camera.
2. Date-Time
YYYY-MM-DD, HH-MM-SS
Manually set the camera's date and time according to your local time. The date and
time will also be automatically updated when you connect your camera to the XDV app.
12