Dragon Touch VISION 3 Manuel D'utilisation page 11

EN
Customizing Your Vision 3
Video Settings
On the video settings screen, press the Down button to choose a setting from the
available options, then press the OK button to confirm your selection and change
the setting.
1. Video Resolution
4K 30FPS/2.7K 30FPS/1080P 60FPS/1080P 30FPS/720P 120FPS/720P 60FPS/720P
30FPS (Default setting: 4K 30FPS)
This camera is capable of recording video up to 4K30fps. The higher resolution, the
greater clarity and detail, thus the larger the file.
Note: Capturing high-resolution or high-fps videos in warm environments can cause
the camera to heat up and consume more power.
2. Recording Sound
On / Off (Default: On)
When "Recording Sound" is disabled, the camera will record video without audio.
3. Time-lapse
Close/0.5s/1s/2s/5s /10s/30s/60s (Default setting: Close)
This option allows you to set the interval at which the camera captures a frame of
video. Time Lapse Video creates video from frames captured at specific intervals.
Note: Time-lapse video is captured without audio.
4. Loop Recording
Close/1min /3 min /5 min (Default setting: Close)
Loop Recording allows your camera to overwrite old files with new ones. Once the
memory card is full, the camera will delete the first video file to make room for the
latest one. For instance, if you select the "1min" option, the camera will create
1-minute video clips, and the oldest video clip will be deleted when the camera
requires more space.
5. Slow Motion
720P 120FPS/1080P 60FPS (Default setting: 720P 120FPS)
The camera will record slow motion video at the set resolution. The video footage
will appear to be in slow motion when played back.
Note: Slow Motion video is captured without audio.
9