NAVEE V50 NKT2211-D32 Manuel Utilisateur page 6

4. Assembly
EN
1. Erect the vertical column to a complete upright position, lift up the safety lock and push the folding wrench
inward tightly. Then open the kickstand.
2. Press the safety lock and pull out the quick release lever. Then turn the handlebar 90° counterclockwise and push
the quick release lever inward.
07
90°
Install AirTag holder
Tips: You need to buy AirTag separately.
Preload the AirTag into the AirTag holder according to the pictures.
Hold the stem, press the safety lock, pull out the quick release lever, fold the stem, and insert the AirTag
holder into the base.
Erect the vertical column to a complete upright position, lift up the safety lock and push the folding
wrench inward tightly.
EN
08