If The Refrigerator Can Not Pass Through A Door During Installation, Follow These Steps °•°•°•°•°•°•°•°• 39 - Pelgrim SBS090A Notice D'utilisation

If the refrigerator can not pass through a door
during installation, follow these steps.
Removing Freezer Door
1 Remove the bottom cover first.
Pull out the left collar of the coupling
first, then hold the coupling and pull
out the left water tube.
4 Lift up the front of hinge to remove.
( After the hinge is removed the
door can fall down forward. Be
careful !)
Removing Refrigerator Door
1 Unscrew top hinge cover with
ascrew driver.
Insert a thin screw driver into the
side groove of the cover to remove.
4
Lift the door straight up to remove.
Remove front bottom cover first, if it is attached.
2 Unscrew top hinge cover with a
screw driver.
5 Be careful not to damage the water line
when removing the door.
2 Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect harness wires.
39
3 Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect the harness wires.
3 Lift up the front of hinge to remove.
(After the hinge is removed the
door can fall down forward. Be
careful !)
en