JUKI LK-1930 Manuel D'utilisation page 6

Precautions to be taken so as to use the LK-1930 more safely
1. To avoid electrical shock hazards, neither open the cover of the electrical box for the motor nor
touch the components mounted inside the electrical box.
2. After changing the pattern, make sure the needle entry point. If the pattern is protruded from
the work clamp feet, the needle will interfere with the work clamp feet during sewing, and it is
dangerous due to the needle breakage or the like.
1. So as to prevent possible accidents caused by abrupt start of the sewing machine, depress the
start switch after ascertaining that there is no interfering thing under the needle when winding
the bobbin thread.
2. So as to prevent possible accidents caused by abrupt start of the sewing machine, never place
your fingers under the feeding frame since the feeding frame automatically comes down when
the pattern is changed, the needle threading switch is ON, the bobbin thread winding switch is
ON or the feeding frame switch is ON.
3. Be aware that the feeding frame will go up if you turn OFF the power while the sewing machine
is in operation. So, do not place your hands near the presser foot.
4. Be careful of handling this product so as not to pour water or oil, shock by dropping, and the
like since this product is a precision instrument.
5. This is a Class A product. In a domestic environment this product may cause radio interfer-
ence, in which case the user may be required to make corrective actions.
v